dimensions in inches (mm) call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 08 single pole sockets - solder mount 450 - xxxx - xx - xx - 00 how to order code basic part no. finish 450-2598 -01 .019 (0.48) .208 (5.28) .032 (0.81) - .063 (1.60) .049 (1.24) .026 (0.66) -- .052 (1.32) 450-3268 -01 .019 (0.48) .208 (5.28) .032 (0.81) .215 (5.46) .063 (1.60) .049 (1.24) --- .052 (1.32) 450-3772 -01* .019 (0.48) .212 (5.38) .015 (0.38) .207 (5.26) .060 (1.52) .049 (1.24) --- .052 (1.32) -02* .019 (0.48) .208 (5.28) .015 (0.38) - .060 (1.52) .049 (1.24) .030 (0.76) .052 (1.32) 450-3703 -01* .025 (0.64) .142 (3.61) .020 (0.51) .141 (3.58) .074 (1.88) .053 (1.35) --- .055 (1.40) 450-3718 -01* .031 (0.79) .188 (4.78) .018 (0.46) .190 (4.83) .090 (2.29) .073 (1.85) --- .076 (1.93) 1 450-7004 -01 .031 (0.79) .235 (5.97) .030 (0.76) .182 (4.62) .091 (2.31) .068 (1.73) --- .073 (1.85) 450-3704 -01* .040 (1.02) .188 (4.78) .018 (0.46) .190 (4.83) .090 (2.29) .073 (1.85) --- .076 (1.93) 450-3722 -01 .050 (1.27) .195 (4.95) .018 (0.46) .200 (5.08) .120 (3.05) .098 (2.49) --- .102 (2.59) 450-1813 -01 .061 (1.55) .195 (4.95) .018 (0.46) - .120 (3.05) .098 (2.49) .071 (1.80) -- .102 (2.59) 450-3326 -01 .061 (1.55) .195 (4.95) .018 (0.46) .200 (5.08) .120 (3.05) .098 (2.49) --- .102 (2.59) 450-1812 -01 .065 (1.65) .195 (4.95) .018 (0.46) - .120 (3.05) .098 (2.49) .071 (1.80) -- .102 (2.59) 450-3708 -01 .080 (2.03) .350 (8.89) .020 (0.51) .360 (9.14) .143 (3.63) .114 (2.90) --- .116 (2.95) 2 450-3716 -01* .040 (1.02) .190 (4.83) .018 (0.46) .190 (4.83) .090 (2.29) .073 (1.85) .046 (1.17) - .013 (0.33) .076 (1.93) 450-3230 -01 .025 (0.64) .112 (2.84) .080 (2.03) .150 (3.81) .080 (2.03) .058 (1.47) - .073 (1.85) .030 (0.76) .062 (1.57) 450-3293 -01 .025 (0.64) .102 (2.59) .080 (2.03) - .080 (2.03) .058 (1.47) .046 (1.17) .073 (1.85) .030 (0.76) .062 (1.57) 450-3286 -01 .040 (1.02) .200 (5.08) .036 (0.91) - .125 (3.18) .085 (2.16) .062 (1.57) .092 (2.34) .020 (0.51) .089 (2.26) 3 450-3366 -01 .040 (1.02) .125 (3.18) .192 (4.88) .192 (4.88) .125 (3.18) .085 (2.16) - .091 (2.31) .032 (0.81) .089 (2.26) 450-3388 -01 .040 (1.02) .200 (5.08) .036 (0.91) .190 (4.83) .125 (3.18) .085 (2.16) - .092 (2.34) .020 (0.51) .089 (2.26) 450-5301 -01 .040 (1.02) .112 (2.85) .108 (2.75) .185 (4.70) .102 (2.59) .074 (1.88) - .092 (2.34) .030 (0.76) .076 (1.93) 450-3256 -01 .080 (2.03) .312 (7.92) .100 (2.54) - .188 (4.78) .142 (3.61) .104 (2.64) .143 (3.63) .047 (1.19) .144 (3.66) 450-3398 -01 .080 (2.03) .312 (7.92) .100 (2.54) .333 (8.46) .188 (4.78) .142 (3.61) - .143 (3.63) .047 (1.19) .144 (3.66) fig. basic part p a bcd d1 d2 d4 g mtg. hole no. diameter body brass copper* spring beryllium copper (heat treated) component material rohs material code table finish code table -03 gold over nickel gold over nickel -04 electro-tin electro-tin -06 electro-tin gold over nickel dash no. body finish spring finish rohs
dimensions in inches (mm) see page 91 for recommended anvil and punch single pole sockets - press mount call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 09 450 - xxxx - xx - xx - 00 how to order code basic part no. finish 450-3720 -01 .031 (0.79) .213 (5.41) .037 (0.94) .185 (4.70) .110 (2.79) .080 (2.03) .092 (2.34) .092 (2.34) - .070 (1.78) .062 (1.57) .089 (2.26) 1 450-3954 -01 .040 (1.02) .140 (3.56) .080 (2.03) .185 (4.70) .102 (2.59) .072 (1.83) .092 (2.34) .081 (2.06) - .052 (1.32) - .076 (1.93) 450-3721 -01 .040 (1.02) .213 (5.41) .037 (0.94) .185 (4.70) .110 (2.79) .080 (2.03) .092 (2.34) .092 (2.34) - .070 (1.78) .062 (1.57) .089 (2.26) 450-5348 -01 .040 (1.02) .090 (2.30) .129 (3.29) .185 (4.70) .102 (2.59) .072 (1.83) .092 (2.34) .081 (2.06) - .052 (1.32) - .076 (1.93) 2 450-3755 -01 .040 (1.02) .200 (5.08) .040 (1.02) .185 (4.70) .110 (2.79) .082 (2.08) .092 (2.34) .092 (2.34) - .070 (1.78) .062 (1.57) .089 (2.26) 3 450-3752 -01 .040 (1.02) .140 (3.56) .080 (2.03) .185 (4.70) .102 (2.59) .074 (1.88) .092 (2.34) ---- .076 (1.93) 4 450-1801 -01 .040 (1.02) .175 (4.45) .055 (1.40) .185 (4.70) .125 (3.18) .100 (2.54) .092 (2.34) .103 (2.62) --- .099 (2.53) 450-1804 -01 .061 (1.55) .195 (4.95) .018 (0.46) .200 (5.08) .120 (3.05) .098 (2.49) -- .100 (2.54) -- .102 (2.59) 450-1806 -01 .080 (2.03) .356 (9.04) .015 (0.38) .360 (9.14) .143 (3.63) .114 (2.90) -- .150 (3.81) -- .116 (2.95) 5 450-3983 -01* .025 (0.64) .138 (3.51) .020 (0.51) .141 (3.58) .074 (1.88) .053 (1.35) -- .080 (2.03) -- .055 (1.40) 450-3998 -01* .031 (0.79) .188 (4.78) .018 (0.46) .190 (4.83) .090 (2.29) .073 (1.85) -- .100 (2.54) -- .076 (1.93) 450-3729 -01* .040 (1.02) .188 (4.78) .018 (0.46) .190 (4.83) .090 (2.29) .073 (1.85) -- .100 (2.54) -- .076 (1.93) 6 450-3723 -01* .040 (1.02) .188 (4.78) .018 (0.46) .190 (4.83) .090 (2.29) .073 (1.85) - .046 (1.17) - .005 (0.13) - .076 (1.93) fig. basic part p a bc d d1 d2 d3 eg board mtg. hole no. thickness diameter body brass copper* spring beryllium copper (heat treated) component material rohs material code table finish code table -03 gold over nickel gold over nickel -04 electro-tin electro-tin -06 electro-tin gold over nickel dash no. body finish spring finish rohs
single pole sockets - patchcord crimp call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 13 fig. basic part p a bc d d1 e fgh no. 450 - xxxx - 01 - xx - xx how to order code basic part no. socket finish insulator colour 450-3367 -01 .040 (1.02) .224 (5.69) .306 (7.77) .185 (4.70) .105 (2.67) .091 (2.29) .031 (0.79) .060 (1.52) .029 (0.74) .282 (7.16) 1 also available with black polyolefin sleeve as 450-3378-01-xx-10 450-1807 -01 .080 (2.03) .420 (10.67) .306 (7.77) .375 (9.53) .170 (4.32) .143 (3.63) .031 (0.79) .060 (1.52) .029 (0.74) .282 (7.16) 2 450-0016 -01 .061 (1.55) .234 (5.94) .296 (7.52) .190 (4.83) .141 (3.58) .119 (3.02) .046 (1.17) .076 (1.93) .039 (0.99) .267 (6.78) also available with black polyolefin sleeve as 450-3413-01-xx-10 body brass spring beryllium copper (heat treated) insulation polyolefin plastic component material rohs material code table finish code table -03 gold over nickel gold over nickel -04 electro-tin electro-tin -06 electro-tin gold over nickel dash no. body finish spring finish rohs insulation colour code table -00 none -10 black dash no. colour 450-3367/450-3378/450-1807 recommended hook-up wire size - #22awg, 7 strands #30 awg copper wire ptfe insulated sockets also accommodate #20 awg, 7 strands #28 awg copper wire #24 awg, 7 strands #32 awg copper wire 450-0016/450-3413 recommended hook-up wire size - #20 awg, 7 strands #28 awg copper wire ptfe insulated sockets also accommodate #18 awg, 7 strands #26 awg copper wire #16 awg, 19 strands #29 awg copper wire dimensions in inches (mm) see page 91 for recommended crimping pliers
dimensions in inches (mm) dimensions in inches (mm) call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 14 single pole sockets - pcb mount solder snap on colour code insulator 450-3422 -01 .040 (1.02) .100 (2.54) .300 (7.62) .211 (5.36) .040 (1.02) .092 (2.34) .047 (1.19) .024 (0.61) 450-3888 -01 .080 (2.03) .200 (5.08) .400 (10.16) .325 (8.26) .056 (1.42) .142 (3.61) .062 (1.57) .046 (1.17) basic part p abcd d1 d2 e no. 450 - 3xxx - 01 - xx - 00 how to order code basic part no. finish body brass spring beryllium copper (heat treated) clip brass component material rohs material code table finish code table -03 gold over nickel gold over nickel gold over nickel -04 electro-tin electro-tin electro-tin -06 electro-tin gold over nickel electro-tin 450-3422 -01 .125 (3.18) .100 (2.54) .125 (3.18) .416 (10.57) .028 (0.71) .229 (5.82) .016 (0.41) 450-3888 -01 .218 (5.54) .156 (3.96) .188 (4.78) .537 (13.64) .038 (0.97) .325 (8.26) .020 (0.51) basic part f gh j k l m no. dash no. body finish spring finish clip rohs 506-4422 -01 450-3422 .301 (7.65) .172 (4.37) .162 (4.11) .131 (3.33) 506-4488 -01 450-3888 .415 (10.54) .276 (7.01) .268 (6.81) .194 (4.93) basic part used on ab c d no. part 506 - 44xx - 01 - 00 - xx how to order code basic part no. colour cover nylon component material rohs material code table colour code table -10 black -11 brown -12 red -13 orange -14 yellow dash no. colour -15 green -16 blue -17 violet -18 grey -19 white dash no. colour
dimensions in inches (mm) dimensions in inches (mm) single pole sockets - solder mount - moulded guided entry call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 15 450-1826 -01 .061 (1.55) .125 (3.18) .162 (4.11) .200 (5.08) .093 (2.36) .098 (2.49) .250 (6.35) .102 (2.59) basic part p abd d1 d2 c mtg. hole no. diameter 450 - 1826 - 01 - 03 - 20 how to order code basic part no. insulator colour socket finish body brass spring beryllium copper (heat treated) insulator nylon jack: component material material code table finish code table -03 gold over nickel gold over nickel dash no. body finish spring finish rohs insulation colour code table -20 natural mounting hardware supplied un-assembled. *red ptfe is not rohs compliant 1 450-3358 -01 1.000 (25.4) .375 (9.53) .131 (3.33) .312 (7.92) .281 (7.14) .093 (2.36) .047 (1.19) .050 (1.27) .540 (13.72) .080 (2.03) 3000 nylon 450-3359 -01 1.000 (25.4) .375 (9.53) .131 (3.33) .312 (7.92) .281 (7.14) .093 (2.36) .047 (1.19) .050 (1.27) .540 (13.72) .080 (2.03) 3000 ptfe 2 450-3381 -01 1.000 (25.4) .375 (9.53) .131 (3.33) .312 (7.92) .281 (7.14) .090 (2.29) .062 (1.57) .050 (1.27) .540 (13.72) .080 (2.03) 3000 nylon 450-3382 -01 1.000 (25.4) .375 (9.53) .131 (3.33) .312 (7.92) .281 (7.14) .090 (2.29) .062 (1.57) .050 (1.27) .540 (13.72) .080 (2.03) 3000 ptfe fig. basic part a b c d d1 d2 d3 ecp dielectric withstand insulator no. voltage (rms) insulator nylon (450-3358 & 450-3381) insulator ptfe (450-3359 & 450-3382) metal sleeve brass socket body brass socket spring berillium copper (heat treated) mounting hex nut brass internal tooth lockwasher phosphor bronze component material rohs material code table finish code table -03 gold gold nickel nickel nickel over over nickel nickel dash no. socket body socket spring metal sleeve mtg.. hex nut lockwasher rohs finish finish finish finish finish insulation colour code table -10 black -12 red* -16 blue -19 white dash no. colour single pole sockets - insulated - thread mount 450 - xxxx - 01 - 03 - xx how to order code basic part no. insulator colour terminal finish dash no. colour
dimensions in inches (mm) see page 91/92 for recommended anvil and punch call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 20 connector pins - straight 460 - xxxx - xx - xx - 00 how to order code basic part no. finish l length pin brass component material rohs material code table finish code table -03 gold over nickel -04 electro-tin dash no. pin finish rohs fig. basic part l length board l1 ab d d1 d2 d3 mtg. hole no. thickness diameter 460-2599 -01 .051(1.30) .031(0.79) .035(0.89) .156(3.96) .030(0.76) .017(0.43) .049(1.24) .033(0.84) .078(1.98) .052(1.32) -02 .082(2.08) .062(1.57) .062(1.57) -03 .113(2.87) .094(2.39) -04 .145(3.68) .125(3.18) 460-5247 -01 .061(1.55) .025(0.64) - .157(3.99) .016(0.41) .017(0.43) .019(0.48) - .039(0.99) .025(0.64) -02 .075(1.91) .040(1.02) 460-2620 -01 .051(1.30) .031(0.79) .040(1.02) .150(3.81) .020(0.51) .025(0.64) .031(0.79) .020(0.51) .050(1.27) .035(0.89) -02 .082(2.08) .062(1.57) 460-2621 -01 .051(1.30) .031(0.79) .040(1.02) .300(7.62) .020(0.51) .025(0.64) .031(0.79) .020(0.51) .050(1.27) .035(0.89) -02 .082(2.08) .062(1.57) 460-2625 -01 .051(1.30) .031(0.79) .040(1.02) .150(3.81) .170(4.32) .025(0.64) .031(0.79) .020(0.51) .050(1.27) .035(0.89) -02 .082(2.08) .062(1.57) 460-2626 -01 .051(1.30) .031(0.79) .040(1.02) .150(3.81) .420(10.67) .025(0.64) .031(0.79) .020(0.51) .050(1.27) .035(0.89) -02 .082(2.08) .062(1.57) 460-3231 -01 .051(1.30) .031(0.79) .035(0.89) .125(3.18) .025(0.64) .025(0.64) .040(1.02) .025(0.64) .062(1.57) .043(1.09) 1 -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-3393 -01 .062(1.57) .031(0.79) .040(1.02) .125(3.18) .030(0.76) .025(0.64) .058(1.47) .040(1.02) .078(1.98) .062(1.57) -02 .094(2.39) .062(1.57) .062(1.57) -03 .125(3.18) .094(2.39) -04 .156(3.96) .125(3.18) 460-2983 -01 .051(1.30) .031(0.79) .040(1.02) .300(7.62) .020(0.51) .031(0.79) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2984 -01 .051(1.30) .031(0.79) .040(1.02) .150(3.81) .020(0.51) .031(0.79) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2627 -01 .051(1.30) .031(0.79) .040(1.02) .150(3.81) .170(4.32) .040(1.02) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2628 -01 .051(1.30) .031(0.79) .040(1.02) .150(3.81) .420(10.67) .040(1.02) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39)
call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 21 connector pins - straight fig. basic part l length board l1 ab d d1 d2 d3 mtg. hole no. thickness diameter 460-2946 -01 .051(1.30) .031(0.79) .040(1.02) .500(12.70) .020(0.51) .040(1.02) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2947 -01 .051(1.30) .031(0.79) .040(1.02) .750(19.05) .020(0.51) .040(1.02) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2948 -01 .051(1.30) .031(0.79) .040(1.02) 1.000(25.40) .020(0.51) .040(1.02) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2970 -01 .051(1.30) .031(0.79) .040(1.02) .300(7.62) .020(0.51) .040(1.02) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2971 -01 .051(1.30) .031(0.79) .040(1.02) .150(3.81) .020(0.51) .040(1.02) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 1 460-2976 -01 .051(1.30) .031(0.79) .040(1.02) .188(4.78) .020(0.51) .040(1.02) .040(1.02) .025(0.64) .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-3220 -01 .062(1.57) .031(0.79) .040(1.02) .188(4.78) .020(0.51) .045(1.14) .060(1.52) .042(1.07) .094(2.39) .064(1.63) -02 .094(2.39) .062(1.57) -03 .125(3.18) .094(2.39) -04 .155(3.94) .125(3.18) 460-3342 -01 .053(1.35) .031(0.79) .050(1.27) .188(4.78) .025(0.64) .062(1.57) .062(1.57) .043(1.09) .094(2.39) .067(1.70) -02 .084(2.13) .062(1.57) -03 .115(2.92) .094(2.39) 460-1524 -01 .051(1.30) .031(0.79) .040(1.02) .500(12.70) .030(0.76) .080(2.03) .090(2.29) .067(1.70) .156(3.96) .094(2.39) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2629 -02 .094(2.39) .062(1.57) .062(1.57) .375(9.53) .025(0.64) .080(2.03) .090(2.29) .064(1.63) .125(3.18) .094(2.39) -03 .125(3.18) .094(2.39) -04 .156(3.96) .125(3.18) 460-2956 -01 .051(1.30) .031(0.79) - .500(12.70) .020(0.51) .040(1.02) .040(1.02) - .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2957 -01 .051(1.30) .031(0.79) - .750(19.05) .020(0.51) .040(1.02) .040(1.02) - .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-2958 -01 .051(1.30) .031(0.79) - 1.000(25.40) .020(0.51) .040(1.02) .040(1.02) - .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) 2 -03 .113(2.87) .094(2.39) 460-3232 -01 .051(1.30) .031(0.79) - .300(7.62) .020(0.51) .040(1.02) .040(1.02) - .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-3233 -01 .051(1.30) .031(0.79) - .150(3.81) .020(0.51) .040(1.02) .040(1.02) - .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39) 460-3241 -01 .051(1.30) .031(0.79) - .100(2.54) .020(0.51) .040(1.02) .040(1.02) - .070(1.78) .043(1.09) -02 .082(2.08) .062(1.57) -03 .113(2.87) .094(2.39)
dimensions in inches (mm) dimensions in mm call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 24 connector pins - edge mount 46x - xxxx - xx - xx - 00 how to order code basic part no. finish pin brass component material rohs material code table finish code table -03 gold over nickel -04 electro-tin dash no. pin finish rohs 1 460-8250 -01 .200 (5.08) - .117 (2.97) - .040 (1.02) -- 2 461-2633 -01 .188 (4.77) - .156 (3.96) .132 (3.35) .040 (1.02) .062 (1.57) - 3 461-2634 -01 .200 (5.08) .031 (0.78) .156 (3.96) .125 (3.18) .040 (1.02) .062 (1.57) .045 (1.15) -02 .062 (1.57) .078 (1.98) fig. basic part a board bc d e s no. thickness x - x - x - xxxx - xxxx - 3 - x how to order code finish d dia b standoff length a pin length c mounting length style b - brass t - tellurium copper b-1-b-0478-0432-3-4 brass 1.02 b 4.78 4.32 gold 2.70 example part number material pin dia d style pin length a stand off finish mounting length b length c pin b brass t tellurium copper component material rohs dash letter material code table finish code table -03 gold over nickel dash no. finish rohs dash no. c mounting length dash no. d pin diameter pin dia code table 1 1.02 2 1.57 3 2.03 mounting code table 1 0.90 2 1.50 3 2.00 4 2.70 connector pins - solder mount polygon
dimensions in inches (mm) see page 92 for recommended crimping pliers call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 25 connector pins - patchcord crimp fig. basic part abd d1 d2 efghj no. 460-3308 -01 .282 (7.16) .306 (7.77) .105 (2.67) .077 (1.96) .040 (1.02) .031 (0.79) .060 (1.50) .029 (0.74) .282 (7.16) .188 (4.78) 460-3368 -01 .282 (7.16) .306 (7.77) .105 (2.67) .077 (1.96) .062 (1.57) .031 (0.79) .060 (1.52) .029 (0.74) .282 (7.16) .188 (4.78) 1 460-3369 -01 .200 (5.08) .306 (7.77) .105 (2.67) - .080 (2.03) .031 (0.79) .060 (1.52) .029 (0.74) .282 (7.16) - -02 .375 (9.53) -03 .500 (12.70) 460-3299 -01 .200 (5.08) 2.96 (7.52) .141 (3.58) - .080 (2.03) .046 (1.17) .076 (1.93) .040 (1.02) .267 (6.78) - 2 -02 .375 (9.53) -03 .500 (12.70) 3 460-3050 -01 .125 (3.18) .188 (4.78) .062 (1.57) - .025 (0.64) .032 (0.81) .048 (1.22) .025 (0.64) .166 (4.22) - also available with black polyolefin sleeve as 461-3102-01-xx-10 460-3050 / 461-3102 recommended hook-up wire size - # 28awg, 7 strands # 36 awg copper wire plastic insulated .039 (0.99) max. diameter over insulation 460-3308 / 460-3368 / 460-3369 recommended hook-up wire size - # 22awg, 7 strands # 30 awg copper wire pt fe insulated .053 (1.37) max. diameter over insulation socket also accommodates # 20 awg, 7 strands # 28 awg copper wire insulated # 24 awg, 7 strands # 32 awg copper wire insulated 460-3299 recommended hook-up wire size - # 20awg, 7 strands # 28 awg copper wire ptfe insulated socket also accommodates # 18 awg, 7 strands # 26 awg copper wire, insulated # 16 awg, 19 strands # 29 awg copper wire, insulated pin brass insulation polyolefin plastic component material rohs material code table finish code table -03 gold over nickel -04 electro-tin dash no. pin finish rohs insulation colour code table -00 none -10 black dash no. colour 46x - 3xxx - xx - xx - xx how to order code basic part no. socket finish insulator colour
dimensions in inches (mm) call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 28 shorting links - plug xxx - xxxx - xx - 03 - xx how to order code basic part no. pin finish insulator colour (where applicable) brass pin polypropylene insulation component material rohs material code table finish code table -03 gold over nickel dash no. pin finish rohs insulation colour code table -00 none -10 black -12 red -16 blue dash no. colour 360-0004 -01 .200 (5.08) - .200 (5.08) - .025 (0.64) -02 .250 (6.35) -03 .300 (7.62) -04 .400 (10.16) 1 -05 .500 (12.70) 360-0017 -01 .200 (5.08) - .261 (6.63) - .040 (1.02) -02 .250 (6.35) -03 .300 (7.62) -04 .400 (10.16) -05 .500 (12.70) 461-2871 -01 .200 (5.08) .375 (9.53) .181 (4.60) .250 (6.35) .040 (1.02) 2 -02 .250 (6.35) 461-3771 -01 .400 (10.16) .620 (15.75) .181 (4.60) .432 (10.97) .040 (1.02) -02 .500 (12.70) 461-2251 -01 .200 (5.08) .334 (8.48) .125 (3.18) - .025 (0.64) -02 .250 (6.35) .384 (9.75) -03 .300 (7.62) .434 (11.02) -04 .400 (10.16) .534 (13.56) 3 -05 .500 (12.70) .634 (16.10) 461-2872 -01 .200 (5.08) .334 (8.48) .181 (4.60) - .040 (1.02) -02 .250 (6.35) .384 (9.75) -03 .300 (7.62) .434 (11.02) -04 .400 (10.16) .534 (13.56) -05 .500 (12.70) .634 (16.10) fig. basic part albcd no. typical application
|
